2f3e5fd0

8.4.2. Removal of a rear bumper

Fig. 8.37. Dismantling components of a rear bumper: 1 – arms of fastening of facing of a luggage carrier; 2 – facing of a luggage carrier; 3 – the amplifier of a bumper from a body; 4 – bumper shock-absorber; 5 – side holders of a bumper; 6 – rear bumper; 7 – internal фи


Dismantling components of a rear bumper are shown in fig. 8.37.
You make installation as it should be, the return to removal.
Remove a floor mat of the luggage compartment.
Take out a spare wheel assembled with a fastening arm.

Fig. 8.38. Removal of facing of a luggage carrier


Disconnect clips and remove facing of a luggage carrier (fig. 8.38).
Disconnect two clips and remove internal finishing of a luggage carrier.
Turn off eight nuts, four bolts and disconnect four clips of fastening of a rear bumper.

Fig. 8.39. Removal of a rear bumper


Unscrew two screws, remove side holders of a bumper and remove a rear bumper (fig. 8.39).
Take out percussion caps and remove clamps from the inside of a bumper.
Remove the bumper shock-absorber.
Turn off six nuts of fastening and remove the amplifier of a bumper from a body.