NOTE Procedures of adjustment of the left and right back doors are identical.

Fig. 8.13. Admissions of size of gaps of doorways

Examine back doors and check that the size of gaps of doorways was in limits of the admissions designated in the figure 8.13.

NOTE The size of admissions is given in mm.

If the size of gaps differs from specified, adjust the provision of doors.

Disconnect the next to central racks a percussion cap of fastening of finishing of a threshold of a back door.

Disconnect the percussion cap of fastening of finishing of a threshold of a forward door, next to the central rack.

Remove finishing of the central rack.

Fig. 8.14. Adjustment of longitudinally vertical position of a back door

Weaken fastening of door loops and adjust the provision of doors in vertical and longitudinal provisions (fig. 8.14).

Moment of an inhaling of adjusting bolts: 26 N · m.

Fig. 8.15. Adjustment of cross vertical position of a back door

If it is necessary, adjust also cross vertical position of doors (fig. 8.15).

Moment of an inhaling of adjusting bolts: 26 N · m.