Remove back wheels.

Fig. 4.38. Removal of a back seat

Remove lock clip-on earrings of a pillow of a back seat. Nominate him and, supporting from below, remove (fig. 4.38).

Remove a back of a back seat.

Remove internal finishing of a back part of salon.

Remove fastenings of back seat belts.

Fig. 4.39. Nut of fastening of a rack of the stabilizer of cross stability of a back suspension bracket

Turn off a nut of fastening of a rack of the stabilizer of cross stability of a back suspension bracket (fig. 4.39).

Fig. 4.40. Bolts of fastening of the holder of a brake hose and plait of wires of the sensor of frequency of rotation (ABS)

Turn off 2 bolts, remove a brake hose and a plait of wires of the sensor of frequency of rotation (ABS) from a damping rack (fig. 4.40).

Fig. 4.41. Nuts of the lower fastening of a rack of the shock-absorber

Weaken two nuts of fastening from the lower party of a rack of the shock-absorber (fig. 4.41).

Put a jack under a rotary fist.

Remove a protective cover of a rack of the shock-absorber.

Fig. 4.42. Central nut of the top support of a rack

Weaken the central nut of the top support of a rack (fig. 4.42).

ATTENTION Do not remove a nut.

Fig. 4.43. Nuts of fastening of the top support of a rack

Turn off 3 nuts of fastening of the top support of a rack (fig. 4.43).

Remove a jack from under a rotary fist.

Otvergite finally bolts of the lower fastening of a rack of the shock-absorber.

Remove a shock-absorber rack assembled.

Fig. 4.44. Fixing of a rack of the shock-absorber in a vice

Establish a bolt and two nuts on the lower arm of a rack of the shock-absorber and fix a rack in a vice (fig. 4.44).

Fig. 4.45. Compression of a spring by means of the special tool

Using the special tool 09727-30021, squeeze a spring (fig. 4.45).

Finally turn off the central nut of fastening of the top support of a rack and remove a rack support. Sort a rack, having removed a spring, the limiter of the course of compression and the lower insulator of a spring.