Remove forward wheels.

Fig. 4.33. Nuts of fastening of a rack of the stabilizer of cross stability

Turn off 2 nuts of fastening and disconnect the left and right racks of the stabilizer of cross stability from the lower lever (fig. 4.33).

ATTENTION If the axis of the spherical hinge is turned together with a nut, use a hexagonal wrench (on 6 mm) to hold a rack.

Remove a damper of a frame of a forward suspension bracket.

Fig. 4.34. Fastening of a collar of a damper of the stabilizer of cross stability

Turn off 2 bolts of a collar and remove a damper of the stabilizer of cross stability (fig. 4.34).

Remove the stabilizer of cross stability. Remove it on the left side.

Fig. 4.35. Check of the moment of scrolling of the spherical hinge of a rack of the stabilizer

Check the moment of scrolling of the spherical hinge of a rack of the stabilizer (fig. 4.35).

Using a dynamometer key, rotate a nut continuously (one turn for 2–4 c) and read the instrument on the fifth turn.

Scrolling moment: 0,05–1,96 N · m.

Fig. 4.36. Scheme of installation of a damper of the stabilizer of cross stability

Establish a damper of the stabilizer of cross stability. Establish it by the back party turned to inside of the stabilizer (fig. 4.36).

Establish other details as it should be, the return to removal.