Remove a forward wheel.

Fig. 4.22. Untwisting of a nut of fastening of a rack of the stabilizer of cross stability

Turn off a nut of fastening of a rack of the stabilizer of cross stability (fig. 4.22).

ATTENTION If the axis of the spherical hinge is turned together with a nut, use a hexagonal wrench (on 6 mm) to hold a rack.

Fig. 4.23. Weakening of a lock-nut of the top support of a rack

Weaken a lock-nut of the top support of a rack (fig. 4.23).

ATTENTION Do not turn off a nut finally.

Fig. 4.24. Detachment of a brake hose and plait of wires of the sensor of frequency of rotation (ABS)

Disconnect a bolt of fastening of an arm of a brake hose. Disconnect a brake hose (fig. 4.24), a plait of wires of the sensor of frequency of rotation (ABS).

Disconnect fastening collars from a rack.

Remove 2 bolts and two nuts of fastening of a damping rack.

Fig. 4.25. Nuts of fastening of the top support of a rack

Turn off 3 nuts of fastening of the top support of a rack and remove a damping rack (fig. 4.25).

Establish a bolt and two nuts on an arm in the lower part of a rack and fix it in a vice.

Fig. 4.26. Compression of a spring of a rack with the help of the special tool

Using the special tool, squeeze a spring (fig. 4.26).

Using the special tool, hold the top cup of a spring and turn off a nut.

Sort a rack, having removed the top support of a rack, the bearing, the top cup of a spring, the insulator of the shock-absorber, the course limiter a szhitiya, a spring and the insulator of a spring.