Establish a fist of a nave of a back suspension bracket, having fixed it by 2 bolts and nuts.

Inhaling moment: 255 N · m.

Fix the lever of a back suspension bracket No. 1 on a fist of a nave of a back suspension bracket by a bolt and a nut, having temporarily tightened a bolt.

NOTE Insert a bolt from the forward party of the car and at installation of a nut rotate a bolt. Fix the lever of a back suspension bracket No. 2 on a fist of a nave of a back suspension bracket by a bolt and a nut, having temporarily tightened a bolt. Establish a nave of a back wheel. Establish a drift control system sensor wire. Establish a back disk. Establish a support of a disk brake. Temporarily tighten bolts of an extension of a back suspension bracket assembled. Stabilize a suspension bracket.

Fig. 3.158. Bolts of fastening of the lever of a back suspension bracket No. 1

Completely tighten bolts of fastening of the lever of a back suspension bracket No. 1 (fig. 3.158).

Fig. 3.159. Bolts of fastening of the lever of a back suspension bracket No. 2

Completely tighten bolts of fastening of the lever of a back suspension bracket No. 2 (fig. 3.159).

Fig. 3.160. Bolts of fastening of an extension of a back suspension bracket assembled

Completely tighten bolts of fastening of an extension of a back suspension bracket assembled (fig. 3.160).

Establish a back wheel.

Inhaling moment: 103 N · m.

Examine and adjust the angles of installation of back wheels.

Check ABS speed sensor signal.