Remove a forward wheel.

Disconnect a forward left support of a disk brake.

Remove a forward disk.

Using the indicator of hour type, check a gap about the center of a nave of a wheel.

At most: 0,05 mm.

If the gap exceeds a maximum, replace the bearing.

Using the indicator of hour type, check a beating for peripheries of a surface of a nave of a wheel.

At most: 0,05 mm.

If the beating exceeds a maximum, replace a nave.

Establish a forward disk.

Establish a forward left support of a disk brake.

Establish a forward wheel.

Inhaling moment: 103 N · m.

Remove a back wheel.

Disconnect a back left support of a disk brake.

Remove a back disk.

Install the indicator of hour type about the center of a nave of a wheel and check an axial gap.

At most: 0,05 mm.

If the gap exceeds a maximum, replace a nave.

Using the indicator of hour type, check a beating for peripheries of a surface of a nave of a wheel.

At most: 0,07 mm.

If the beating exceeds a maximum, replace a nave.

Establish a back disk.

Establish a back left support of a disk brake.

Establish a back wheel.

Inhaling moment: 103 N · m.

Fig. 3.131. Check of a gap of the hug bearing of a forward wheel

Fig. 3.132. Check of a beating of a nave of a forward axis

Fig. 3.133. Check of a gap of the hug bearing of a back wheel

Fig. 3.134. Check of a beating of a nave of a back axis