Remove forward wheels.

Remove the lower protection covers of the engine.

Remove a drain stopper of the automatic transmission and merge working liquid. Having replaced laying of a drain stopper, establish it into place, having twirled the moment of an inhaling of 49 N · m.

Remove forward halts in collecting (see further).

Fig. 3.126. Removal of an epiploon of a forward cover of a case of the main transfer

Using special adaptation 09308-00010, remove an epiploon of a forward cover of a case of the main transfer (fig. 3.126).

Fig. 3.127. Removal of an epiploon of a case of the transmission

Using special adaptation 09308-00010, remove an epiploon of a case of the transmission (fig. 3.127).

Grease a working edge of a new epiploon with the MR jellied lubricant.

Fig. 3.128. Press fitting of an epiploon of a forward cover of a case of the main transfer

Using special adaptation 09608-10010 and the hammer, press a new epiploon (fig. 3.128).

Press fitting depth: (0±0,5) mm.

ATTENTION You watch to damaging a working edge of an epiploon.

Cover a working edge of a new epiploon with the MR jellied lubricant.

Fig. 3.129. Press fitting of an epiploon of a case of the main transfer

Using special adaptation 09608-32010 and the hammer, establish a new epiploon (fig. 3.129).

Carry out assembly and installation of other elements as it should be, the return to removal.