2f3e5fd0

3.2.4. Replacement of a forward epiploon of differential

Merge oil.
Remove forward wheels.
Remove a forward left power shaft assembled.
Remove a forward right power shaft assembled.

Fig. 3.55. Removal of an epiploon of a forward cover of a case of the main transfer


Using special adaptation 09308-00010, remove an epiploon of a forward cover of a case of the main transfer (fig. 3.55).

Fig. 3.56. Removal of an epiploon of a case of the transmission


Using special adaptation 09308-00010, remove an epiploon of a case of the transmission (fig. 3.56).
Grease a working edge of a new epiploon with the MR jellied lubricant.

Fig. 3.57. Press fitting of an epiploon of a forward cover of a case of the main transfer


Using special adaptation 09608-10010 and the hammer, press a new epiploon (fig. 3.57).
Press fitting depth: (0±0,5) mm.

ATTENTION
You watch to damaging a working edge of an epiploon.

Grease a working edge of a new epiploon with the MR jellied lubricant.

Fig. 3.58. Press fitting of an epiploon of a case of the main transfer


Using special adaptation 09608-32010 and the hammer, establish a new epiploon (fig. 3.58).
Carry out assembly and installation of other elements as it should be, the return to removal.
Add oil in the transmission.
Oil class: GL-4 API or GL-5.
Viscosity: SAE 75W-90.
Filling volume: 2,5 l.
Inhaling moment: 49 N · m.
Check oil level in the transmission.
Check and adjust the angles of installation of forward wheels.
Check an ABS sensor speed signal.