Fig. 3.31. Bolts of fastening of an arm of the working cylinder of coupling and intermediate accumulator of coupling

Turn off bolts of fastening of an arm of the working cylinder of coupling (are shown by shooters in the figure 3.31).

Using special adaptation 09023-00100, disconnect two flexible hoses. Turn off two bolts and two nuts of fastening of the intermediate accumulator of coupling.

Remove the working cylinder of coupling assembled.

Remove a cover from the cylinder case.

Turn out a pusher from the cylinder case.

Take out the piston from the cylinder case.

Take out a spring from the cylinder case.

Uncover a drain stopper.

Remove a spuskny stopper of the working cylinder.

Check and clean the working cylinder of coupling.