2f3e5fd0

2.4.8. Dismantling, check and assembly of the block of cylinders

Preliminary operations
Check of an axial side play of the conrod bearing
Check of a radial side play of the conrod bearing
Removal of the piston and rod assembled
Measurement of an axial side play of a bent shaft
Check of oil radial gaps
Check of the block of cylinders
Measurement of diameter of cylinders
Dismantling of conrod and piston group
Check of a gap between the piston and the cylinder
Check of coaxiality of heads of a rod
Check of an oil gap of a piston finger
Measurement of diameter of a piston finger
Vypressovka and press fitting of the plug of the top head of a rod
Check of a face gap of a compression ring
Check of a gap in the lock of a piston ring
Check of a beating of a bent shaft
Check of conrod and radical necks
Hairpins and caps
Assembly of conrod and piston group
Installation of piston rings
Installation of inserts of conrod bearings
Assembly of the block of cylinders
Installation of a stopper of discharge of cooling liquid
Installation of the oil pump
Installation of the oil pallet
Installation of the lower cover of a case
Installation of the lower part of the oil pallet
Installation of the case of the thermostat