Fig. 2.377. Places of putting sealant on the contact surface of the case of the thermostat

Remove the remains of old laying, wash out the case, clear the easily evaporating solvent of a surface of the case and block and do not allow hit of oil on a thermostat case prileganiye surface to the block of cylinders. Apply sealant on the thermostat case, as shown in the figure 2.377.

Install the thermostat case, wrap eight bolts and two nuts of fastening the moment of an inhaling of 8 N · m.

Establish conducting clips.

Install sensors of a detonation and connect their sockets.