Establish a maslouspokoitel on the top part of the oil pallet.

Using solvent, clear the surfaces of contact and consolidations.

NOTE Do not use solvent which will influence the painted surfaces.

Fig. 2.375. Places of putting sealant on a contact surface of the top part of the oil pallet

Apply sealant on a contact surface of the top part of the oil pallet, as shown in the figure 2.375.

Establish the top part of the oil pallet and tighten two nuts and seventeen bolts the inhaling moment:

head of 10 mm – 8 N · m;

head of 12 mm – 20 N · m;

head of 14 mm – 37 N · m.