Install the sensor of position of the camshaft, having tightened its moment inhalings of 9 N · m.

Fig. 2.176. Places of putting sealant

Apply new sealant to the places shown in the figure 2.176.

Fig. 2.177. Bolts of fastening of a cover of a head of the block of cylinders

Establish a cover of a head of the block of cylinders, having tightened fastening bolts the moment of an inhaling of 11 N · m (fig. 2.177).

Install the union of the oil pump (model without oil heater), having tightened its moment inhalings of 30 N · m.

Fig. 2.178. Tightening of a perepuskny bolt of the oil heater: 1 – nut

Install the oil heater, having tightened perepuskny a bolt the moment of an inhaling of 78,5 N · m, and a fastening nut – the moment of an inhaling of 9 N · m (fig. 2.178).

Fig. 2.53. Removal of an oil filter: 1 – special tool

Establish an oil filter (see fig. 2.53).

Wrap spark plugs the moment of an inhaling of 19 N · m.

Install the PCV valve, having wrapped its moment inhalings of 19 N · m.

Wrap a cover of a maslozalivny mouth.