2.2.7.19. Installation of inserts of conrod bearings
Combine an insert ledge with bore in the lower head of a rod and in a cover. Insert inserts into the lower head of a rod and into a rod cover.
- 1. Operation manual and to maintenance of the car
- 2. Engine
- 2.1. Petrol engines models 1AZ-FE and 2AZ-FE
- 2.2. Mechanical part of engines of models 1AZ-FE and 2AZ-FE
- 2.2.1. General information and safety measures on removal of the power unit
- 2.2.2. Removal of sealant
- 2.2.3. The specification of types of the applied nuts and bolts
- 2.2.4. Service of a mechanical part of the engine
- 2.2.5. General repair operations
- 2.2.6. Dismantling, check and assembly of a head of the block of cylinders
- 2.2.7. Dismantling, check and assembly of the block of cylinders
- 2.2.7.1. Dismantling of the block of cylinders
- 2.2.7.2. Check of a radial side play of the conrod bearing
- 2.2.7.3. Replacement of inserts of radical bearings
- 2.2.7.4. Removal of the piston and rod assembled
- 2.2.7.5. Measurement of axial and radial side plays of a bent shaft and in radical bearings
- 2.2.7.6. Check of a gap between the piston and the cylinder
- 2.2.7.7. Check of a gap between a compression ring and a flute
- 2.2.7.8. Check of a gap in the lock of a piston finger
- 2.2.7.9. Check of internal diameter of an opening under a finger in the piston
- 2.2.7.10. Check of diameter of a piston finger
- 2.2.7.11. Check of landing of a piston finger
- 2.2.7.12. Check of a rod
- 2.2.7.13. Check of a kolnchaty shaft
- 2.2.7.14. Check of conrod and radical necks
- 2.2.7.15. Check of conrod bolts
- 2.2.7.16. Check and replacement of inserts of radical bearings
- 2.2.7.17. Assembly of conrod and piston group
- 2.2.7.18. Installation of piston rings
- 2.2.7.19. Installation of inserts of conrod bearings
- 2.2.7.20. Assembly of the block of cylinders
- 2.2.8. General assembly
- 2.3. Petrol engine of model 1MZ-FE
- 2.4. Mechanical part of the engine of model 1MZ-FE
- 2.5. Appendix
- 2.6. Tables
- 3. Transmission
- 4. Running gear
- 5. Steering
- 6. Brake system
- 7. Onboard electric equipment
- 8. Body
- 9. Schemes of electric equipment
