2f3e5fd0

2.2.6.4. Check of an axial side play of the camshaft

Fig. 2.85. Check of an axial side play of the camshaft


Install camshafts. Measure by the indicator an axial side play, moving the camshaft back and forth (fig. 2.85).
Nominal side play:
admission – 0,040–0,095 mm;
release – 0,080–0,135 mm.
Limit gap:
admission. – 0,11 mm;
release – 0,15 mm.
If the axial side play is more than most admissible, replace the camshaft. If it is necessary, replace covers of bearings and a head of the block of cylinders.