Remove the oil pressure sensor.

Remove the sensor of temperature of cooling liquid.

Remove the sensor of position of the camshaft, having turned off a fastening bolt.

Remove pushers.

Fig. 2.80. Removal of crackers, plates of a spring, a spring and the valve by means of special adaptation: 1 – special tool; 2 – wooden whetstones

Remove valves. By means of the special tool 09202-70020 (09202-00010) squeeze a spring of the valve and remove two crackers. Remove a plate springs, a spring and the valve (fig. 2.80).

Fig. 2.81. Removal of an oil scraper cap

Using flat-nose pliers, remove oil scraper caps.

Remove a saddle of a valvate spring.

Remove bolts of fastening of a head of the block of cylinders.