126.96.36.199. Removal of a chain of the drive of the oil pump
Fig. 2.62. Correct (combined on tags) the provision of a bent shaft: 1 – an opening on a pump housing
Turn a bent shaft on 90 ° counterclockwise and combine a tag of a shaft of the oil pump with an opening on a pump housing, as shown in the figure 2.62.
Insert a pin with a diameter of 4 mm into a shaft opening, having recorded it, and turn off a nut.
Remove a natyazhitel of a chain of the drive of the oil pump with a spring, having turned off a fastening bolt, after that remove asterisks and a chain.