– For cooling of your Toyota car after the parking in hot weather, do a bit of traveling with open windows within several minutes. It will air hot air that will allow the air conditioning system to cool interior of the car quicker.

– Make sure that air admission lattices before a windshield are not hammered (for example, leaves or snow).

– In rainy days do not give cold air on a windshield. The windshield can mist over because of a difference in air temperature from the external and internal parties of a windshield.

– Do not encumber the place under front seats, allowing air to circulate on all car.

– In cold days establish the high speed of rotation of the fan for one minute for cleaning of inlet pipelines of snow or moisture. It can lower extent of fogging of glasses.

– When driving on dusty roads close all windows. If dust which is kicked up by the car nevertheless gets to the car after closing of all windows, it is recommended to install the air admission regulator in situation FRESH, and to install the regulator of speed of the fan in any situation, except the provision of "OFF".

Fig. 1.116. The scheme of adjustment of air streams in interior of the car

– If you follow other car on the dusty road or conduct the car in windy and dusty conditions, it is recommended to install temporarily the air admission regulator in situation RECIRCULATION which will close an external air duct and will prevent hit of external air and dust in interior of the car.

For obtaining the best results establish governing bodies as it is described below.

For the automatic mode – press the AUTO button.

Temperature – up to the necessary temperature.

Air admission – in situation FRESH (external air).

Air conditioning – in situation OFF.

For the manual mode:

fan speed – in the provision of the necessary speed of the fan.

Temperature – to situation WARMLY.

Air admission – in situation FRESH (external air).

Air stream – in situation the FLOOR.

Air conditioning – in situation OFF.

– For bystry heating choose internal air circulation within several minutes. For prevention of fogging of windows choose supply of fresh air after warming up of interior of the car.

– Press the A/C button for reduction of humidity when heating.

– Choose an air stream towards a floor / windshield for heating of interior of the car at simultaneous defrosting or drying of a windshield.

For obtaining the best results establish governing bodies as it is described below.

For the automatic mode – press the AUTO button.

Temperature – up to the necessary temperature.

Air admission – in situation FRESH (external air).

Air conditioning – in situation INCL.

For the manual mode:

fan speed – in the provision of the necessary speed of the fan.

Temperature – to situation COLD.

Air admission – in situation FRESH (external air).

Air stream – in situation the PANEL.

Air conditioning – in situation INCL.

For bystry cooling choose internal air circulation within several minutes.

For obtaining the best results establish governing bodies as it is described below.

For the automatic mode – press the AUTO button.

Temperature – to low temperature.

Air admission – in situation FRESH (external air).

Air conditioning – in situation OFF.

For the manual mode:

fan speed – in the provision of the necessary speed of the fan.

Temperature – to situation COLD.

Air admission – in situation FRESH (external air).

Air stream – in situation the PANEL.

Air conditioning – in situation OFF.

For obtaining the best results establish governing bodies as it is described below.

For the automatic mode:

temperature – in the direction of high temperature for heating; in the direction of low temperature for cooling

Air admission – in situation FRESH (external air).

Air stream – in situation the WINDSHIELD.

For the manual mode:

fan speed – in the provision of the necessary speed of the fan.

Temperature – in the direction of high temperature for heating; in the direction of low temperature for cooling.

Air admission – in situation FRESH (external air).

Air stream – in situation the WINDSHIELD.

Pressing of the button of a windshield leads to simultaneous inclusion of air conditioning in the mode of heating of glasses. At this time the indicator of the A/C button, regardless of that turns on, the A/C button is pressed or not. It is provided for more bystry cleaning of the forward review.

For switching off only of air conditioning press the A/C button once again.

If the A/C button is not pressed, air conditioning is switched off by pressing of other button of an air stream.

– In rainy days do not give cold air on a windshield – the difference between internal and external temperatures can strengthen fogging.

For obtaining the best results establish governing bodies as it is described below.

For the automatic mode:

temperature – in the direction of high temperature.

Air admission – in situation FRESH (external air).

Air stream – in situation the WINDSHIELD.

For the manual mode:

fan speed – in the provision of the necessary speed of the fan.

Temperature – in the direction of high temperature.

Air admission – in situation FRESH (external air).

Air stream – in situation FORWARD STELO.

Pressing of the button of a windshield leads to simultaneous inclusion of air conditioning in the mode of heating of glasses. At this time the indicator of the A/C button, regardless of that turns on, the A/C button is pressed or not. It is provided for more bystry improvement of the forward review.

For switching off only of air conditioning press the A/C button once again.

If the A/C button is not pressed, air conditioning is switched off by pressing of other button of an air stream.

– For heating of interior of the car at simultaneous defrosting of a windshield, choose an air stream towards a floor/windshield.