Fig. 1.93. Adjusting components of a seat with manual adjustment: 1 – lever of adjustment of provision of a seat; 2 – handle of adjustment of height of a pillow of a seat; 3 – lever of adjustment of a corner of provision of a seatback; 4 – regulator of provision of a lumbar support сидень

Undertake the center of the lever 1 and pull it up. Then move a seat to the necessary situation with easy effort of the body and release the lever (fig. 1.93).

Pull the lever 2 up or press it. Bend forward and pull the lever 3 up. Then bend to a desirable tilt angle back and release the lever. Press the regulator 4 in the necessary direction. When pressing the regulator the support of lumbar department amplifies or decreases.

ATTENTION Do not throw back a seatback back too strongly. At blow in front or behind seat belts provide the maximum protection in case the driver and the passenger on a front seat sit directly, and seatbacks are almost vertical. If the seatback is cast strongly away back, then the zone seat belt can slip on hips therefore the constraining effort is necessary on a stomach, and the belt thrown through a shoulder can press on a neck. In case of blow in front the risk of a trauma or death increases with increase in an inclination of a back back.